Description:
The FPGA evaluation board has been designed to offer a low-cost and minimal system for designers who need a flexible platform to gain exposure to the Spartan 3 device, or for those who need to prototype FPGA-based designs rapidly. The Spartan 3 evaluation board provides only the essential supporting devices for the Spartan 3, and routes all available FPGA signals to standard expansion connectors. Included on the board are 2.5VDC and 3.3VDC regulators, a JTAG configuration circuit that uses a standard parallel cable, basic communication ports including an enhanced parallel port and 5-wire serial port, a 50MHz oscillator, and a pushbutton and LED for Rudimentary I/O. The JTAG programming circuit follows the JTAG schematic available from Xilinx, so that the Spartan 3 evaluation board is fully compatible with all Xilinx programming tools. The Spartan 3 evaluation board has been designed specifically work with the Xilinx ISE CAD tools, including the free Web Pack tools available From the Xilinx website. The Spartan 3 evaluation board ships with a power supply and programming cable, so Designs can be implemented immediately without the need for any additional hardware.
Specification:
A Xilinx XC2S200E FPGA
Dual on-board 1.5A power regulators (2.5V and 3.3V)
A socketed 50MHz oscillator
An EPP-capable parallel port for JTAG based FPGA programming and user data Transfers.
A 5-wire Rs-232 serial port, a status LED and pushbutton for basic I/O. Six 100-mil spaced, right-angle DIP socket 40-pin expansion connectors.
Onboard 8 Channel ADC (0809)
Onboard general Purpose Area for user development.
Product Includes:
Evaluation Board with (SPARTAN 3)
5V AC Adaptor
RS232 Serial Cable
USB Cable (Power Supply)
User Manual
CD contains
|
Products 
