# DC FUNDAMENTAL TRAINER ### Objectives

The DC Fundamental Trainer provides comprehensive, hands-on instruction in the terminology, principles and applications of DC circuits following a carefully designed Instructional manual.

### Topic Covers:

• Instrument familiarization
• Symbols and schematics
• Circuit Voltage
• Circuit Current
• Circuit Resistance
• DC Power Sources in Series and in Parallel Series
• Opposing DC Sources
• Identify Types of Switches
• Switching Concepts
• Ohm's Law: Circuit Resistance
• Circuit Resistance
• Ohm's Law: Circuit Current
• Ohm's Law: Circuit Voltage
• Resistance in a Series Resistive Circuit
• Current in a Series Resistive Circuit
• Voltage in a Series Resistive Circuit
• Resistance in a Parallel Resistive Circuit
• Voltage and Current in a Parallel Resistive Circuit
• Resistance in a Series - Parallel Resistive Circuit
• Voltage in a Series - Parallel Resistive Circuit
• Current in a Series - Parallel Resistive CircuitPower in a Series Resistive Circuit
• Power in a Parallel Resistive Circuit
• Power in a Series - Parallel Resistive Circuit
• The Rheostat
• The Potentiometer
• Voltage Dividers
• The DC Ammeter
• The DC Ohmmeter
• The DC Voltmeter
• Troubleshooting DC Circuits
• Voltage Divider
• Voltmeter/Ammeter/Ohmmeter

### Circuit Blocks:

• LDR characteristics
• Ohm's Law
• Series Circuit
• Parallel Circuit
• Series/Parallel Circuit
• Measurement of Power
• Maximum Power transfer theorem
• Magnetism and electromagnetism
• Network theorem
• Linear/Non-Linear Variable Resistor Voltage Divider Voltmeter/Ammeter/Ohmmeter

### Features of the Trainer:

Built in Regulated Power Supply DC (+1.2V to +15V)/500mA,(-1.2v to -15v)/500mA Voltage range : AC 100V - 230 V Frequency range : 50 - 60Hz It is housed in an elegant metal cabinet(CNC Machine finish) 45cm x 45cm x 18cm 6 Kg (approx).

This trainer is a glass-epoxy printed circuit board and all the symbols screen-printed on the front panel so that it enables the student to conduct the experiments easily

### Accessories:

• 2mm multi coloured moulded patch cords with daisying facility.
• Computer simulated outputs and Step-By-Step detailed instructions are provided with the instruction manual.
• Single strand wires.
• Aligner.
N2
Model: N2 VERIFICATION OF BOOLEAN EXPRESSIONS Objective To...
N3
Model: N3 ADDER/SUBTRACTOR USING EX-OR GATES Objective To...
N4
Model: N4 R-S/D/T FLIP-FLOPS CHARACTERISTICS &...
N5
Model: N5 J-K FLIP FLOPS Objective To study...
N6
Model: N6 MASTER SLAVE J-K FLIP-FLOP...
N7
Model: N7 DIODE MATRIX ENCODER Objective To convert...
P1
Model:P1 OPERATIONAL AMPLIFIER CHARACTERISTICS   Objectives To study the...
P2
Model:P2 VOLTAGE FOLLOWER   Objectives To verify that the...
P3
Model:P3 SUMMER /SUBTRACTOR /DIFFERENTIATOR AND INTEGRATOR...
P4
Model:P4 VOLTAGE TO FREQUENCY CONVERTER   Objectives To construct...
P5
Model:P5 FREQUENCY- TO-VOLTAGE CONVERTER   Objectives To verify that...
P6
Model:P6 VOLTAGE TO CURRENT & CURRENT...
P7
Model:P7 PRECISION HALF WAVE & FULL...
ANTENNA SYSTEM TRAINER - AST
Model: AST ANTENNA SYSTEM TRAINER 700MHZ...
BLUETOOTH TRAINER - BTT
Model: BTT BLUETOOTH TRAINER Objectives Study of Bluetooth...
DOPPLER RADAR TRAINING SYSTEM - DRTS
Model:DRTS DOPPLER RADAR TRAINING SYSTEM Objectives Study of...
ISDN TRAINER - ISDN
Model:ISDN ISDN TRAINER INTRODUCTION LAB ELECTRONICS ISDN TRAINER... 