Model: PT-1




  • To study the basic pneumatic action to affect mechanical motion using pressurized air.
  • Installed on a single bench
  • Comes with pneumatic cylinders along with different types of valves.


    • MANIFOLD: 6 Ports, 1/4 inch, fitted with elbow quick couplings. Outlet of FRL is connected to inlet of manifold. All the ports have regulated pressure and make pressure source for the trainer
    • AIR COMPRESSOR: Max. Pressure : 8 - 10 bar. Power: 1 HP.


  • Filter: Press type manual drain for easy operation.A pneumatic filter is a device which removes contaminants from a compressed air stream.
  • Regulator:Non-raising press to lock adjusting knob for locking at any set point.
  • Lubricator:Fine adjustment for lubrication.


  • Single acting cylinder spring return. Port size - 1/8” Working Pressure -0.5-10 Bar Foot-mounted, fixed permanently on cabinet.
  • Double Acting Cylinders - 2 Sets Port size 1/8”, Adjustable cushioning at both ends working pressure -0.5-10 bar fixed permanently on cabinet


    • 5/2 Push Button/Spring Return,
    • Directional valve - 2 Nos 1/8” port size, with couplings 3/2 Roller Lever/ Spring Return
    • Directional valve - 2 Nos 3/2 Roller Lever Directional valve 1/8 “ port size, with couplings – 2nos
    • Push Pull Detent Valve – 1 no
    • Hand Lever Valve – 1 no
    • OR Valve with couplings, - 2 Nos
    • AND Valve with couplings, - 2 Nos
    • 5/2 Single External Pilot Valve, 1/4” size - 3 Nos with coupling
    • 5/2 Double External Pilot valve, - 3 Nos 1/4” size couplings
    • Single Solenoid Valve – 1 no,Operating Voltage : 24Vdc
    • Double Solenoid Valve – 1no,Operating Voltage : 24Vdc
    • INLINE SLIDE Valve – 1no
    • FLOW CONTROL VALVE: 4nos,fine regulation of air flow. male threads(R) Teflon coated.
    • AIR REGULATOR:Suitable for panel and modular mountings Non raising Press to lock adjusting knob for locking at any set pressure Diaphragm operated, relieving type Pressure compensated by balanced poppet.
  • PU Tubes 8mm ID x 10mm OD, Blue
  • Power Supply: 24V DC

List of experiments that can be conducted using this trainer:

  • Study of pneumatic actuator & reciprocating cylinder trainer kit with different logical Circuits such as OR, AND etc. operations.
  • Study of pneumatic cylinders, single acting, double acting.
  • Study of pneumatic control systems.

logo footer